Tel : +86 0519-85922787     +86 13915018025
  • Introduction of Junhe-8035 metal forming agent 2017-10-26
    Product descriptionJunhe-8035 metal film containing silane composition, cold rolled sheets, galvanized steel, aluminum, aluminum alloy, zinc alloy and steel pretreatment of substrate surface. This additive can replace metal parts of iron phosphating, zinc phosphate and chrome treatment. This additiv...
  • What is Environmental film series? 2017-10-25
    1/ product overviewJunhe-8035 containing silane film on metal surface treatment agent component, cold rolled sheets, galvanized steel, aluminum, aluminum alloy, zinc alloy and steel pretreatment of substrate surface. This surface treatment agent can replace metal parts of iron phosphating, zinc phos...
  • What is silicon cutting fluid 2017-10-24
    1/ product overview Diamond grit cutting fluid is a new product, it is mainly used for all kinds of hard and brittle materials (monocrystalline silicon, polycrystalline silicon, germanium, gallium arsenide, gallium, indium nitride, quartz, precious stones, non-metal materials, etc) in cutting proces...
  • JUNHE Cleaning series 2017-10-24
    Refers to the use of chemical cleaning method and the method of chemical agents to clean the device purpose. In the industrial production process, due to various reasons, the equipment (types of towers, heat exchanger and tank containers and various reaction Kettle) and pipeline such as polymers, co...
  • What is the metal coating? 2017-10-22
    The metal coating is used for metal coating to protect the metal and reduce wear. Unprotected metal rust and corrosion due to environmental exposure. By coating the metal, an additional protective layer is provided.The metal coating is usually made of a polymer, such as an epoxy resin, a polyurethan...
  • What is metal coating? 2017-10-17
    The metal coating is a ground metal suspended in a non-toxic aqueous acrylic adhesive. They can be applied to metal and non-metallic surfaces such as glass, wood, ceramics, concrete, foam and resin.All Dye-Oxide Patinas, Universal Patinas, Vista Patinas, Solvent Dyes, Patina Stains and Finishing Wax...
  • Main features of Dip Spin Coating 2017-10-16
    Dip-coating with high labor and materials, production efficiency, equipment with simple operation, can be continuous production mechanization and automation features, the most suitable for mass production of a single species. Dip Spin Coating Equipment Mainly applied to small metal parts, steel pipe...
  • Describes main process of Dip Spin Coating technology 2017-10-15
    1) film thickness depends on the object to enhance speed and viscosity of the paint. Control the viscosity of the paint according to the above degrees, according to the film the maximum degree of 30um, depending on the device, it determines the appropriate upgrade rate. Click here for rate promotion...

Hot News

  • Introduction of Junhe-8035 metal forming agent 2017-10-26 Product descriptionJunhe-8035 metal film containing silane composition, cold rolled sheets, galvanized steel, aluminum, aluminum alloy, zinc alloy and steel pretreatment of substrate surface. This additive can replace metal parts of iron phosphating, zinc phosphate and chrome treatment. This additive does not contain volatile material, its metal surface coating adhesion and corrosion resistance, a...
  • What is Environmental film series? 2017-10-25 1/ product overviewJunhe-8035 containing silane film on metal surface treatment agent component, cold rolled sheets, galvanized steel, aluminum, aluminum alloy, zinc alloy and steel pretreatment of substrate surface. This surface treatment agent can replace metal parts of iron phosphating, zinc phosphate and chrome treatment. Junhe environmentally-friendly metal surface treatment agent does not co...
  • What is silicon cutting fluid 2017-10-24 1/ product overview Diamond grit cutting fluid is a new product, it is mainly used for all kinds of hard and brittle materials (monocrystalline silicon, polycrystalline silicon, germanium, gallium arsenide, gallium, indium nitride, quartz, precious stones, non-metal materials, etc) in cutting process, have excellent lubrication, cooling, corrosion, rust, and inhibition of hydrogen, and TTV wafers ...
  • JUNHE Cleaning series 2017-10-24 Refers to the use of chemical cleaning method and the method of chemical agents to clean the device purpose. In the industrial production process, due to various reasons, the equipment (types of towers, heat exchanger and tank containers and various reaction Kettle) and pipeline such as polymers, coke, oil, dirt, scale, dirt, sediment, corrosion products and other.Based on the above reasons and ma...