The sintering temperature is generally 300-350 degrees of dacromet. The outer wall of the furnace and the temperature difference between the workshop is less than 10. Dacromet sintering is divided into three stages, the first stage is the stage of drying, the base temperature is about 100 DEG C, is mainly to eliminate the workpiece on the water, also known as pre drying stage. The second stage is high temperature curing, the temperature at 300 degrees C to 350 degrees C. Mainly through the high temperature sintering to solidify the liquid on the workpiece. The third stage is the cooling stage, generally higher than the room temperature of about 10 degrees C. Excellent insulation technology - the outer wall of the furnace and the temperature difference between the workshop is less than 10. Select high efficiency combustion machine - gas 100% complete combustion, to achieve zero emissions. According to the principle of air thermal dynamics, the design of the furnace structure and the air supply design - perfect temperature curve and uniform distribution.