3.Stirring A,add B along the wall of the barrel A slowly, add B in 2-3 batch.
4.Speed up striing after B added, make sure the coating paint is fully mixed,then add C. C should be powdered if lump exist.(The barrel temperature should not be lower than 30℃, otherwise C will not be dissolved sufficiently .)Then stir 12 hours alowly and continuously.
5.The coating should be filtrated by 80 mesh stainless steel screen before pouring into dip barrel.
6.Temperature control device should be equipped with dip barrel to keep the temperature of coating at 20±2℃.(If temp. is too high, the paint is liable to deteriorate, and viscosity will be effected.) The coating should be stirred circularly to keep evenly dispersed.
7.Test Specific gravity、PH、Temperature、Viscosity of coating every 8 hours if operate continuously.