Other Equipments
-
-
Junhe® Fully Automatic Mesh Belt Ultrasonic Cleaning Machine
Product Overview
This is an integrated continuous processing equipment for continuous cleaning, rust prevention and drying of standard fasteners. Adopting a stainless steel mesh belt for continuous conveying, the equipment automatically completes spray cleaning, ultrasonic cleaning, rinsing and rust prevention, air knife blowing and hot air drying processes. It is specially designed for high-volume continuous cleaning of standard parts, which effectively reduces manual labor intensity and ensures stable and consistent cleaning quality.
Core Processing Parameters
Item Parameter Cleaning Capacity 1–1.5 tons/hour Applicable Workpieces M5–M56 standard parts Effective Mesh Belt Width 600mm Maximum Passing Height 100mm Continuous Cleaning Solution for Standard Parts
The fully automatic mesh belt ultrasonic cleaning machine is mainly applied for batch cleaning of bolts, nuts and other metal standard fasteners. Workpieces are placed on the stainless steel mesh belt and automatically conveyed to each processing station by the transmission system. After finishing cleaning, rinsing, rust prevention, air blowing and hot air drying procedures, the finished workpieces are automatically output.
The equipment is perfectly suitable for production scenarios with large output, high manual cleaning labor intensity and strict requirements on cleaning consistency and uniformity.
Core Advantages
1Continuous Automatic Production
Workpieces are automatically conveyed by a stainless steel mesh belt with seamless connection of each cleaning station. It eliminates frequent manual handling and waiting time, realizing uninterrupted mass production and greatly improving overall production efficiency.
2Dual-sided Upper & Lower Ultrasonic Cleaning
Ultrasonic waves radiate uniformly from both the upper and lower sides of workpieces. This dual-sided cleaning mode effectively removes dirt from gaps, threads and complex curved surfaces, achieving more thorough and consistent cleaning results than single-sided ultrasonic equipment.
3Multi-stage Rinsing & Anti-rust Treatment
Equipped with dedicated spray rinsing and anti-rust stations to thoroughly reduce residual cleaning agents on workpiece surfaces. It effectively avoids secondary contamination, ensures clean and dry workpiece surfaces, and provides reliable short-term rust protection for standard fasteners.
4Stable & Safe Operation
The equipment is equipped with circulating filtration system, liquid level protection, low liquid level alarm, variable frequency speed regulation and emergency stop devices. It features intuitive operation, safe running status and convenient daily maintenance, reducing equipment failure rate and operational risks.
Cleaning Process Flow
Seven-station Continuous Processing
Loading → Spray Cleaning → Air Knife Dewatering → Ultrasonic Cleaning → Air Knife Dewatering → Spray Rinsing → Spray Rinsing & Anti-rust Treatment → Air Knife Blowing → Hot Air Drying → UnloadingIntegrated with cleaning, rinsing, rust prevention, air blowing and drying functions, the equipment fully meets the requirements of continuous and batch processing for standard fasteners.
Technical Parameters
Item Parameter Applicable Workpieces Bolts, nuts and other metal standard fasteners Workpiece Specification M5–M56 Cleaning Capacity Approx. 1–1.5 tons/hour Effective Mesh Belt Width 600mm Maximum Passing Height 100mm Conveying Speed 0.5–1.5m/min, variable frequency adjustable Ultrasonic Frequency 28kHz Cleaning Medium Tap water, cleaning agent, anti-rust agent Drying Temperature 80–120℃ Drying Method Hot air circulation drying with liquefied gas burner Power Supply AC380V, three-phase five-wire system Total Equipment Power Approx. 45kW Equipment dimensions, station configuration and process parameters can be customized according to workpiece specifications, oil contamination types and production capacity requirements.Main Equipment Components
The complete equipment consists of the following core systems and auxiliary structures:
- Spray Cleaning System
- Ultrasonic Cleaning System
- Spray Rinsing & Anti-rust System
- Air Knife Blowing & Dewatering System
- Hot Air Drying System
- Circulating Filtration & Mist Absorption System
- Auxiliary configurations: stainless steel mesh belt, outer frame enclosure, electrical control system, loading and unloading devices
-
Junhe® Model B650A Crawler Shot Blasting Machine
Product OverviewJunhe® B650A crawler shot blasting machine is mainly applied for batch surface cleaning of small and medium-sized metal workpieces. Driven by a rubber crawler, workpieces keep tumbling continuously. Meanwhile, high-speed blast wheels hurl abrasive shots evenly onto workpiece surfaces to remove oxide layers, rust and other attachments, enabling workpieces to meet required surface cleanliness and roughness for subsequent processing.Integrated with automatic feeding, shot blasting cleaning, abrasive recycling, vibratory discharging, dust removal and electric control, the equipment boasts reasonable structure, easy operation, stable running and convenient maintenance.Process FlowWorkpiece Loading→Hydraulic Feeding→Workpieces Enter Blast Cabinet→Workpiece Tumbling Driven by Crawler→High-speed Shot Blasting Cleaning→Automatic Abrasive Recycling & Circulation→Crawler Reversal for Discharging→Vibrating Screen Conveying→Workpiece CollectionIn operation, material baskets loaded with workpieces are placed on the feeding mechanism, and the hydraulic system tips workpieces into the shot blasting cabinet. The rubber crawler keeps rotating to tumble workpieces fully, ensuring uniform shot bombardment across all workpiece surfaces.After blasting, the crawler runs in reverse direction to send workpieces onto the vibrating screen, which conveys finished parts to collecting bins via vibration. Used abrasive shots are recollected, lifted, screened and separated before being fed back into the blasting system for cyclic reuse.Equipment Features1Uniform Cleaning EffectContinuous tumbling driven by the rubber crawler allows full shot impact on all sides of workpieces, guaranteeing consistent cleaning quality for bulk batches.2High-efficiency Blasting SystemEquipped with LS-360B direct-coupled blast wheel rated at 7.5 kW. Key wearable components are made of high-chromium alloy with outstanding abrasion resistance.3Automatic Loading & UnloadingFitted with hydraulic feeding unit and vibrating discharge screen to realize automatic workpiece feeding, discharging and transportation, greatly cutting manual workload.4Recyclable Abrasive CirculationThe abrasive circulation system consists of screw conveyor, bucket elevator, air separator and shot control valve, completing automatic collection, separation and cyclic reuse of blasting shots.5High-performance Dust RemovalConfigured with pulse back-blow cartridge dust collector with an air volume of approximately 4,000 m³/h. Its dust collection efficiency reaches over 98.98% for 0.5 μm particulate matter.6Intelligent ControlAdopts PLC + touchscreen control. Operators can set process parameters including blasting duration, blasting current and shot frequency. Real-time equipment status display and fault alarm functions are available.7Safe & Durable ConstructionThe inner wall of the blast cabinet is lined with high-manganese steel wear-resistant liners, and replaceable wear-resistant alloy plates are added in high-impact zones. The machine is equipped with emergency stop buttons, safety guards, maintenance platforms and safety railings.Technical ParametersItem Technical Parameter Equipment Model Junhe® B650A Equipment Type Crawler Shot Blasting Machine Applicable Workpieces Rollable small and medium-sized metal workpieces Workpiece Size Diameter over 6 mm Maximum Loading Capacity Less than 260 kg per batch Recommended Loading Volume 0.07~0.1 m³ Shot Blasting Coverage Rate 95% Blast Wheel Power 7.5 kW Abrasive Recycling Mode Automatic recycling via bucket elevator Abrasive Recovery Efficiency 135 kg/min Dust Removal Type Pulse back-blow cartridge dust removal Dust Removal Air Volume 4000 m³/h Dust Collection Efficiency Higher than 98.98% Dust Emission Concentration Less than 10 mg/m³ Compressed Air Pressure 0.6~0.8 MPa Power Supply Requirement AC 380V, 50Hz Inner Blast Chamber Overall Dimension 1800*1300*2210 mm Overall Machine Dimension Approx. 6350*2200*4800 mm All parameters shall be subject to the technical proposal and final confirmed drawings.Main Components of EquipmentB650A crawler shot blasting machine consists mainly of the following assemblies:- Blast wheel assembly
- Shot blasting cleaning cabinet
- Rubber crawler operation system
- Hydraulic feeding mechanism
- Vibratory discharging screen
- Abrasive circulation system
- Pulse cartridge dust removal system
- Electrical control system
- Maintenance platform and safety protection devices
Application ScopeSuitable for small and medium-sized workpieces that can tumble freely and resist damage from mutual collision. It is applied for the following surface treatments of workpieces:- Rust removal and cleaning
- Descaling of oxide scale
- Foundry sand residue cleaning
- Surface preparation prior to coating
- Surface roughness adjustment
-
JUNHE®QUDR0180 Multi-Tank Fully Automatic Cleaning Machine
Brand Name: JUNHE
Cleaning for Large-Scale and Small-Batch Multi-Variety Workpieces
Pre-Coating Pretreatment Cleaning Machine
-
Coating Machine Parts Chiller
Name: Chiller
Material: Iron Stainless Steel
-
Automatic Shot Blasting Machine / Industrial Shot Blasting Equipment Q326
Brand Name: JUNHE
Model Number: Q326
-
Zinc Flake Coating Machine Parts Go Cart
Name: Go Cart
Material: Iron
-
Zinc Flake Coating Machine Parts Baskets
Name: Workpiece Basket
Material: Steel
-
Dipping Tank For Dacromet Zinc Flake Coating
Name: Dipping Tank
Material:Steel
-
Coating Machine Parts liking Distributors
Name: Distributor
Material: Iron
