Product Features
1、High reflectivity
For high reflectivity, the product uses titanium dioxide with high whiteness and high weather resistance. At the same time, by adjusting the composition and process of the glass powder, the whiteness and covering of the titanium dioxide are maximized. The average reflectivity of 200-mesh printing is around 78.
2、 Low expansion coefficient
High strength and low expansion coefficient of the product. After tempering, a large compressive stress is formed on the glass surface. Under normal circumstances, the cross falling ball on the non-silk screen surface can reach more than 70cm (2mm glass 227 iron ball).
3、 Excellent acid and alkali resistance
The product has excellent acid and alkali resistance, and the glaze has strong hydrolysis resistance under high temperature and high humidity conditions.
4、 Wide construction conditions
The product has a moderate softening point and is suitable for different tempering parameters. It can be softened when the actual temperature in the high temperature zone reaches above 695°.
Main Composition
|
Chemical name |
CAS NO. |
EC NO. |
Composition（Weight%） |
|
Diethylene glycol butyl ether |
112-34-5 |
203-961-6 |
20 |
|
Acrylic polymer |
9003-01-4 |
618-347-7 |
10 |
|
Titanium dioxide |
13463-67-7 |
236-675-5 |
20 |
|
Glass powder |
—— |
—— |
50 |
Glaze properties
1、Pencil hardness standard ≥3H.
2、The adhesion standard requires ≤1 level.
3、Washing resistance test: According to the method specified in GB/T 9266, the reflectance attenuation shall not exceed 3% for 1000 times.
4、Neutral salt spray resistance: tested according to the method specified in GB/T 1771 for 96 hours, the reflectivity attenuation does not exceed 3%.
5、Temperature resistance degeneration test: According to the method specified in IEC 61215, the reflectivity attenuation does not exceed 3%.
6、Humidity and freezing test: According to the method specified in IEC 61215, the reflectivity attenuation does not exceed 3%.
7、Damp heat test: According to the method specified in IEC 61215, the reflectivity attenuation does not exceed 3%.
8、Ultraviolet pretreatment test: According to the method specified in IEC 61215, the reflectance attenuation does not exceed 3%.
Precautions
The product should be sealed and stored in a dry and ventilated place. The shelf life of the product is 6 months.
Others
Packaging is 20kg or 25kg.
This product is not classified as dangerous goods and can be transported by general cargo.
